Clean Other Printer Components
We recommend cleaning the printer on a regular basis to maintain optimal performance.
Always disconnect the printer from any power source before cleaning.
Roller
| TD-4210D/TD-4410D/TD-4420DN | PA-PR2-001 |
| TD-4520DN | PA-PR3-001 |
- Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller.
Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
Print Head
| TD-4210D/TD-4410D/TD-4420DN | PA-HU2-001 |
| TD-4520DN | PA-HU3-001 |
- Wipe the print head with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
- We recommend cleaning the print head monthly.
Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
Cutter
| TD-4210D/TD-4410D/TD-4420DN/TD-4520DN | PA-CU-001 |
- NOTE
-
- Always remove the ejected labels from the Label Output Slot. If the slot becomes blocked, label jams may occur.
- Cutting accuracy cannot be guaranteed for labels with perforations or creases.
- If adhesive residue gets attached to the Label Output Slot, it may cause label jams. Clean the Label Output Slot with a dry cotton swab.
- IMPORTANT
- Do not use alcohol to clean the Label Output Slot.
Label Peeler
| TD-4210D/TD-4410D/TD-4420DN/TD-4520DN | PA-LP-002 |
- Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller.
Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable. - If adhesive residue gets on the Label Peeler, it may cause label jams. Clean the Label Peeler with a dry cotton swab.
- IMPORTANT
- Do not use alcohol to clean the Label Peeler.
Did you find the information you needed?