Search

Site Map

Home > Appendix > Optional Accessories > 4-bay Active Docking Station (Optional:PA-4CR-003) > Connect the Printer to a Wired LAN Network via 4-bay Active Docking Station

Connect the Printer to a Wired LAN Network via 4-bay Active Docking Station

Use an Ethernet (LAN) connection to configure your printer and upgrade its firmware.

image
NOTE
Make sure that the Ethernet (LAN) cable is fully inserted in the Ethernet (LAN) Port.

LED Indicators

image
  1. Ethernet (LAN) LED
    LED Indicator
    Status
    image
    Ethernet (LAN) not connected
    image
    Ethernet (LAN) connected
    image
    Receiving or sending data via Ethernet (LAN)
  2. Status LED
    LED Indicator
    Status
    image
    The printer is placed on the 4-bay Active Docking Station and the battery is fully charged.
    image
    The printer is charging on the 4-bay Active Docking Station.

Interface Compatibility

Use the [WLAN] and [Wired LAN] menus to select WLAN, Wired LAN, or no connection when the printer is on the 4-bay Active Docking Station.

Cradle LAN Setting

WLAN Setting

Connection type when using the 4-bay Active Docking Station

On
On
WLAN →Wired LAN *1
On
Off

No connection enabled →Wired LAN

Off
On
WLAN
Off
Off

No connection enabled

*1
Wireless Direct function is not affected.
Related Information
Did you find the information you needed?

find moreaccept