Search

Site Map

Home > Edit a Label > Create a Barcode Label > Create and Print Barcodes

Create and Print Barcodes

The Label Printer is not designed exclusively for creating barcode labels. Always check that barcode labels can be read by the barcode reader.

For best results, print barcode labels in black ink on white tape. Some barcode readers may not be able to read barcode labels created using coloured tape or ink.

Up to five barcodes can be printed on a label.

NOTE
  • Use the [Large] setting for [Width] whenever possible. Some barcode readers may not be able to read barcode labels created using the [Small] setting.
  • Continuously printing a large number of labels with barcodes can overheat the Print Head, which may affect the print quality.
  • Symbols are available only for the CODE39, CODE128, CODABAR, or GS1-128 protocols.
  • The "C.Digit" (Check Digit) attribute is available only for the CODE39, I-2/5, and CODABAR protocols.

PT-D410

  1. Press image.
  2. Press image or image to display [Barcode Setup], and then press OK.
  3. Press image or image to select an attribute.
  4. Press image or image to set a value for that attribute, and then press OK.
  5. Enter the barcode data. For more information, see Related Topics.
  6. Press image.
  7. Press image or image to select a character, and then press OK.
  8. Press OK.

PT-D460BT

  1. Press image.
  2. Press image, image, image, or image to select an attribute, and then press OK.
  3. Enter the barcode data. For more information, see Related Topics.
  4. Press image.
  5. Press image or image to select a character, and then press OK.
  6. Press OK.
Related Information
Did you find the information you needed?

find moreaccept