• Is the cable not fully connected (when you are using a USB cable)?

  Make sure the cable is connected securely.

• Is the roll installed correctly?

  If not, remove the roll and reinstall it. For more information, see Related Topics.

• Is there enough roll remaining?

  If not, install a new roll.

• Is the Roll Compartment Cover open?

  Make sure the Roll Compartment Cover is closed.

• Has a print error or transmission error occurred?

  Turn the printer off, and then turn it on again. If there is still a problem, contact Brother customer service.

• Is there dirt or lint on the roller preventing it from rotating freely?

  Clean the roller. For more information, see Related Topics.

• Make sure the ejection path of the paper is not blocked.
• Remove the roll and install it again. For more information, see Related Topics.
• Make sure the Roll Compartment Cover is closed completely.

• Open the Roll Compartment Cover.
• Press the (Power) button or (Back) button to cancel the print job.
• Turn the printer off.

• Make sure you entered the media information correctly. You can set the media information using Paper Size Setup in the Printer Setting Tool.
• If the sensor is dirty, wipe it with a dry cotton swab.

  

  

  1. Media Sensor
• Make sure there are no items blocking the sensor.

• Windows 10/Windows Server 2016/Windows Server 2019:

  Click Start > Settings > Devices > Printers & scanners. Click the printer you want to set up, and then click Open queue. Click Printer > Printing Preferences.

  Click the Other tab and select the After one page of data is received option.

• Windows 8.1/Windows Server 2012/Windows Server 2012 R2:

  Click Orientation in the Apps screen. Click Hardware and Sound > Devices and Printers. Right-click the printer you want to set up, and then click the Printing preferences menu.

  Click the Other tab and select the After one page of data is received option.

• Windows 7:

  Click Start > Devices and Printers. Right-click the printer you want to set up, and then click the Printing preferences menu.

  Click the Other tab and select the After one page of data is received option.

Although the print head generally remains clean under normal use, lint or dirt from the roller may become stuck on the printer head. If this occurs, clean the roller. For more information, see Related Topics.

• Is there dust or dirt on the print head or roller preventing it from rotating freely?

  Clean the print head or roller. For more information, see Related Topics.

• Adjust the printing density. The print density can be specified in the Printer Setting Tool.

• Print labels so that barcodes are aligned with the print head as shown below:

  

  1. Print Head
  2. Barcodes
  3. Printing orientation
• Try using another barcode reader.
• Set Print Speed to a slower option. The print speed can be specified in the Printer Setting Tool. For more information, see Related Topics.
• Adjust Print Density. The print density can be specified in the Printer Setting Tool. For more information, see Related Topics.
• Always check that barcode labels can be read by the barcode reader.

• Is the battery inserted correctly?

  Make sure the battery is inserted correctly. If it is, check that the battery has sufficient charge remaining.

• Is the adapter cord securely connected?

  Make sure the cord is connected correctly.

• If the LED Indicator or the LCD still does not light up, contact Brother customer service.

• Is the correct port selected?

  Make sure the correct port is selected.

• Is the printer in cooling mode?

  The message Cooling appears on the LCD.

  Wait until the message disappears and then try printing again.

• Are there any unfinished print jobs?

  If you try to print while other users are printing large amounts of data, the printer is unable to accept your print job until the current print jobs are completed. If this occurs, send the print job again after the other jobs are completed.

• Head:

  If the print head becomes too hot, it may produce imaging on the paper in areas not intended to be printed. This condition is normal when printing documents with a lot of “black” content.

  The printer will stop and resume printing after the print head has cooled down.

  To avoid or delay this condition, print using a lighter density setting, reduce the amount of black space being printed (for example, remove background shading and colors in graphs and presentation documents), and make sure that the printer has adequate ventilation and is not located in an enclosed space.

• Motor or battery:

  Do not use the printer continuously. If the printer is used continuously, the motor or battery will become too hot. In this case, the printer will stop and resume printing after the motor or battery has cooled down.